How you can Repair Rattling, Rotting and Sticky Wooden Windows
Wood made casement and sash house windows will deteriorate over time but regular maintenance and prompt repairs will maintain them for a long time. You can simply repair wooden windows and treatment three of the most frequent problems - rot, rattling and stickiness - in the next way:
Rattling of wooden casement windows is usually caused by an ill-fitting lever fastener. This is easily rectified. If the fastener is worn out there replace it with a new much more reset the plate on the windows frame into which it fastened.
Old wooden sash windows are notorious for rattling. This is usually caused by the bottom part sash fitting too loosely in the frame. To be able to cure it you have to remove the internal staff bead and replace it with the one which it long enough so that it fits closely against the sash. Be sure the rattle is cured by sliding the sash upward and down before you drive in the repairing nails all the way. Rub candle wax on both sliding surfaces.
If the top sash is rattling, pack it out and modify the position of the catch that drags the sashes together. Additionally, fit a fresh fitch or Brighton catch. You can also hold sashes together by fitting dual screws, a security device that will also prevent extremely.
The panels of wood made casement windows Holzfenster kaufen can get bigger in wet weather and this might cause them to stick to the framework, so that it is difficult to open up and close the windows. If the window has not been properly painted yet or recently been stripped, it is often enough to let it dry out in the sunshine and apply a clear wood preserver and an appropriate paint.
Prolonged sticking in all weathers may be due to the build-up of paint. If your window was not kept open when it was last painted it is probably glued to the frame by the paint. Free it by carefully sticking a scraper or thin knife between the window and the body. Once free, you have to strip the old paint where the edges of the window meet the frame and apply fresh paint. Before painting you may also have to plane the edges a little so that the window matches without scraping the body.
You shouldn't have a problem with sticking wood sash windows as the tolerances are such that they do not adhere, unless the sashes have been painted while closed or the staff beads have been badly positioned.
Inspect windows regularly for rot by poking a screwdriver into the frames. The bottom of window frames is particularly susceptible to rot. Any smooth or spongy areas are rotten and really should be fixed. Dig out any spoiled wood with a mill or scraper. Soften the wood repair compound you are going to use by kneading, press into the damaged area and smooth the surface. Repaint the area when the compound has hardened and dried. If the decay is widespread consider changing your windows.