Scale for Body Weight, Digital Bathroom Scale 1 개

Scale for Body Weight, Digital Bathroom Scale, Weight Scales for People,Body Scale,Black,Max:400LB/180KG,2 Weighing Units: LB/KG

• 1. Two weight units: LB and KG. you may convert freely by pressing the button on the back of the weighing scales for people
• 2. Automatic power on/off: when you step on the body weight scale, the sensors will boot up immediately; when you step off the digital bathroom scale, it'll power off
• 3. Non-calibration before weighing: our scales was calibrated twice before they're packed, you needn't calibrate weight again. If the bath scale is on hard floor, and value in the display screen will be real weight
• 4. Friendly design: round edge and corner are safe are safe to you, tempered glass is sturdy to step on, sleek surface is easy to clean it
• 5. Maximum weight: 400LB/180KG/Minimum weight: 0.2KG(0.44LB): if weight is between it, we're sure it's accurate; beyond it, we recommend you to use other suitable scale
•  
•  
• IMPORTANT MESSAGE YOU NEED TO KNOW BEFORE YOU WEIGH, PLEASE DO READ CAREFULLY !!!
  1 . Please note: floor can't be carpet
  floor must be flat and hard surface, tile floor is the best !
  wood floor and cement floor are ok. but, if the scale isn't accurate on them, please place it on tile floor and try again, because it's probably there's something wrong with wood floor and cement floor
  2 . Only weigh after figure is zero
  a. step on the scale, and step off after light is on
  b. wait till figure is zero
  c. step on again, figure will flicer, wait till figure is stationary,figure at that time is your actual weight
  we ensure you'll get correct weight data as long as you do as the above.
  3 . lf you move the scale, make sure the scale is still on flat and hard surface. again, make sure the scale is off before you weigh
  4 . The scale has no switch of on/off, it'll be on automatically after you step on, and it'll be off automatically after you step off
  5 . In some cases, there's error. error range is +500g, we promise error is within it
  
  MISUNDERSTANDING :
  when you step on the scale and see your weight figure, you want to see if figure will increase after you pick up one item, unfortunately, you'll see figure is still same
  please don't think the scale inaccurate, because figure is locked at that time. if you want to know total weight, please step off; after the scale is off, step on; after the scale is on, step off; after figure is zero, step on and wait till figure is stationary, you'l see weight is more than before (pre-condition is this item is more than 50g)
  
   
•