Biore Pore Strips 10 count

Product Details

A sheet-type pack that removes blackheads from pores by simply sticking and peeling off it on the sides of the nose.
Expanding pore-clogging keratin (dirt accumulated in pores) is thoroughly removed from the depths, resulting in skin with less visible pores.
The three-dimensional cut sheet fits snugly to the edges of the nose.
Contains a firming ingredient.
Ingredients and Dosage

Ingredients and Dosage
＜Ingredients＞
Polyquaternium-37, silica, water, glycerin, (PEG／PPG／butylene／dimethicone) copolymer, PEG-12 dimethicone, titanium dioxide, hamamelis extract, BG, stearyl glycyrrhetinate, methylparaben

Directions for Use and Dosage
＜Usage Method＞
1. Take out the pack from the pouch with dry hands.
Open the cut part slightly with your fingers with the transparent film facing you, then peel off the film.
＊Use the pack immediately after opening.
2. Wet the nose thoroughly with water.
3. Wipe off excess water from your hands, then stick the smooth side onto your skin, ensuring good contact.
4. Let it dry until the pack hardens. (Summer: about 10-15 minutes / Spring, Autumn, Winter: about 5-10 minutes)
＊If it dries too much and becomes very hard, or if you try to remove it forcibly, it may damage the skin or peel off the skin, so please be careful.
5. Gently peel it off gradually from the edges.
＜Recommended Usage＞
Use once a week.
＊Do not peel off all at once from one side.
＊If the pack dries out too much or if you experience severe pain while peeling, stop immediately, moisten the pack thoroughly with water, and then carefully remove it.

Form and Shape
Sheet

Other
Product Contact Information
Kao Corporation Consumer Communications Center
Consumer Consultation Room
2-1-3 Fumikana, Sumida-ku, Tokyo
0120-165-692