Brand: BIORE
Specification: 770ml
One sentence product introduction: Rich Foam Moisturizing Hand Care
Ingredients: Isopropyl Methylphenol*, Water, Ammonium Laureth Sulfate (1E.O.), Propylene Glycol, Ethanol, PEG6000, POE Lauryl Ether Acetate, Glycol Ether Glycerol, Acrylamide/Acrylic Acid/Dimethylammonium Chloride Copolymer Solution, Hydroxypropyl Hydroxyethyl Cellulose Trimethyl Ammonium Chloride, EDTA Salt, Lactic Acid, Sodium Hydroxide Solution, Benzoic Acid Salt *indicates "active ingredient" and no indication indicates "other ingredients"
Efficacy: This is a mild acidic, fragrance-free foam hand wash.
Attention: [Attention]
●Do not use when the skin is in abnormal conditions such as eczema or skin inflammation.
●Stop using and consult a dermatologist if redness or itching occurs. Continuing use may worsen symptoms.
●If it gets into the eyes, rinse thoroughly immediately.
[Air Shipping Notice]
●This product is not classified as a dangerous good under aviation regulations.
●No high-pressure gas.
●Alcohol content does not exceed 24%.
●Flash point exceeds 60 degrees (will not continue to burn even if below 60 degrees).
●Not classified as a flammable solid.
Features: 1. This product is also suitable for the kitchen.
2. Unscented, no lingering fragrance on hands.
3. Rich and long-lasting foam, quick rinse, easily wash every corner with a single press.
4. Easy to press, not easy to spill.
5. Effectively cleans hands hygiene.
6. Weakly acidic, same as skin.
7. Utilizes SPT (Skin Purifying Lock Water Technology) to keep even dry skin moisturized after washing hands.
Instructions: ● When the formal capacity is used up, please use the matching supplementary refill to pour into the used pump bottle for replacement.
● Do not pour into other containers.
● Please pour in the replacement refill after the hand soap is used up, ensuring no mixing with other products or products with different production numbers.
● If there is no foaming or the pump cannot be pressed down, please stop using.
● Do not pour more than the "Pour to this position" arrow on the pump bottle.
● Before pouring, carefully wash the inside of the pump bottle and the pump parts with tap water, and air dry.
● Invert and press the pump parts several times to discharge any remaining liquid.
● Do not squeeze the bottle body forcefully after pouring liquid to avoid splashing.
● After pouring, be sure to cover the lid for storage.
● When inquiring, please record the production number located at the bottom of the bottle.
● For hygienic use, it is recommended to replace the pump bottle with a new one after pouring the replacement refill 4-5 times.

반품 정책

고지사항

Weee! 웹 사이트 및 앱에 있는 제품 설명은 정보 알림용 목적으로만 제공됩니다. 당사 면책조항 보기

Weee! 에 대하여

도움이 필요하세요?

앱 받기